Data Acquisition

Articles on Data Acquisition

Braken’ Ain’t Easy
In this article we have a look at using the recorded brake line pressures and the theoretical max brake line pressures we created in the last post to reduce lap times

A step by step guide to building a braking model of a car
In this post we go through the process and equations to build your own brake model, I also put the math equations for both Aim's Race Studio and Motec's i2 software taking into account just load transfer

Are you braking hard enough?
In this post I look at how to create and use the brake speed, agression, and smoothness math channels in both Aim's Race Studio and Motec's i2 software

What to look at when you have just 20 mins
In this post I go over what I think should be looked at if you have just 20 mins to look at your data. We start by looking at engine vitals and find a potential braking issue using Motec i2 software

Braking Bias Consistency
In this post we go over how to do a quick check on the car's braking system using Aim Race Studio 2 software. We start off by going over the theory and then use a real world example to help cement the process